All Products

  • Contact us for information on volume discounts or alternate shipping options
  • Standard 2-day shipping included in price
  • Unless otherwise noted, all items are in stock and ship within 2 business days

     


 

USB-3.2 Type-C to SMA Breakout Board

↑ Click Product Title for Ordering Information↑

SFP+ to SMA Breakout Board

The SS-USB3.2C-SMA breakout board is designed to test everything USB, from USB-2.0 up through dual-lane USB-3.2. It incorporates a standards compliant USB Type-C connector (plug or receptacle boards are available) on one end of the printed circuit board and 20 GHz SMA connectors on the other end of the board. High-speed transmit and receive signals are routed to the SMA connectors via 50-ohm microstrip transmission lines over Rogers RO4350 low-loss dielectric for excellent signal integrity at frequencies up to 30 GHz.

For detailed datasheet click here:  datasheet

$725.00
 

SFP+ to SMA Breakout Board

↑ Click Product Title for Ordering Information↑

SFP+ to SMA Breakout Board

The SS-SFP-SMA breakout board incorporates a standards compliant 20-pin SFP+ "gold finger" board-edge connector on one end of a printed circuit (PC) board and high-speed SMA connectors on the other end of the PC board. High-speed transmit and receive signals are routed to the SMA connectors via 50-ohm microstrip transmission lines over Rogers RO4350 low-loss dielectric for excellent signal integrity at data rates up to 11Gbps or more. Low-speed signals Tx_Fault, SDA, SCL, Mod_ABS, and Rx_LOS are routed to standard 0.1 inch header pins. Tx_Disable, RS0, RS1, VccT, and VccR are routed to test points and include LED indicators. The breakout boards enable test, debug, and development of SFP+ links.

For detailed datasheet click here:  datasheet

$495.00
 

USB-3.0 Plug to SMA Breakout Board

↑ Click Product Title for Ordering Information↑

SS-USB3-SAM-P USB-3.0 to SMA Breakout Board

The SS-USB3-SMA breakout boards incorporate a standard USB-3.0 type-A connector on one end of a printed circuit (PC) board and high-speed SMA connectors on the other end of the PC board. Super Speed 5Gbps pins are routed to the SMA connectors via 50-ohm microstrip transmission lines. USB-2.0 signals (VBUS, D-, D+, and GND) are routed to standard 0.1 inch header pins. The breakout boards enable test, debug, and development of USB-3.0 links.

For detailed datasheet click here:  datasheet

$315.00
 

USB-3.0 Plug to SMA Breakout Board with Monitor Connections

↑ Click Product Title for Ordering Information↑

SS-USB3-SAM-P-M USB-3.0 to SMA Breakout Board w/Monitors

The SS-USB3-SMA breakout boards incorporate a standard USB-3.0 type-A connector on one end of a printed circuit (PC) board and high-speed SMA connectors on the other end of the PC board. Super Speed 5Gbps pins are routed to the SMA connectors via 50-ohm microstrip transmission lines. USB-2.0 signals (VBUS, D-, D+, and GND) are routed to standard 0.1 inch header pins. The breakout boards enable test, debug, and development of USB-3.0 links.

For full datasheet click here:  datasheet

$375.00
 

USB-3.0 Receptacle to SMA Breakout Board

↑ Click Product Title for Ordering Information↑

SS-USB3-SAM-R-M USB-3.0 Receptacle to SMA Breakout Board

The SS-USB3-SMA breakout boards incorporate a standard USB-3.0 type-A connector on one end of a printed circuit (PC) board and high-speed SMA connectors on the other end of the PC board. Super Speed 5Gbps pins are routed to the SMA connectors via 50-ohm microstrip transmission lines. USB-2.0 signals (VBUS, D-, D+, and GND) are routed to standard 0.1 inch header pins. The breakout boards enable test, debug, and development of USB-3.0 links.

For full datasheet click here:  datasheet

$315.00
 

USB-3.0 Receptacle to SMA Breakout Board with Monitor Connections

↑ Click Product Title for Ordering Information↑

SS-USB3-SAM-R-M USB-3.0 Receptacle to SMA Breakout Board w/Monitors

The SS-USB3-SMA breakout boards incorporate a standard USB-3.0 type-A connector on one end of a printed circuit (PC) board and high-speed SMA connectors on the other end of the PC board. Super Speed 5Gbps pins are routed to the SMA connectors via 50-ohm microstrip transmission lines. USB-2.0 signals (VBUS, D-, D+, and GND) are routed to standard 0.1 inch header pins. The breakout boards enable test, debug, and development of USB-3.0 links.

For full datasheet click here:  datasheet

$375.00
 

Serial ATA (SATA) breakout Board

↑ Click Product Title for Ordering Information↑

SS-SATA-SMA-P  SATA to SMA Breakout Board

The SS-SATA-SMA breakout board incorporate a standard SATA male connector on one end of a printed circuit (PC) board and high-speed SMA connectors on the other end of the PC board. High-speed 50-ohm controlled impedance microstrip transmission lines of matched length connect the SATA pins to the SMAs.  The breakout boards enable test, debug, and development of SATA links.

For datasheet click here:  datasheet

$275.00

 

Serial ATA (SATA) breakout Board with Monitor Connections

↑ Click Product Title for Ordering Information↑

SS-SATA-SMA-P-M  SATA to SMA Breakout Board w/Monitors

The SS-SATA-SMA breakout board incorporate a standard SATA male connector on one end of a printed circuit (PC) board and high-speed SMA connectors on the other end of the PC board. High-speed 50-ohm controlled impedance microstrip transmission lines of matched length connect the SATA pins to the SMAs.  The breakout boards enable test, debug, and development of SATA links. The optional monitor connections split off a small portion of the signal, allowing monitoring of the signals on an active SATA link.

For datasheet click here:  datasheet

$345.00